ScanJuggler en

A amigaspirit.hu - pegasos.hu Wiki wikiből

(Változatok közti eltérés)
(SJ XAGA rev.1 -> rev.2)
a
15. sor: 15. sor:
* Also supports Productivity/Euro72/DBLxxx screen modes
* Also supports Productivity/Euro72/DBLxxx screen modes
* Supports border blanking
* Supports border blanking
-
* HW support for DDC/CI (software support TBD)
+
* HW support for DDC/CI (software support needed)
-
* Other special extras (to be announced)
+
* Other special extras (TBA)
* Firmware and FPGA logics updateable from AmigaOS
* Firmware and FPGA logics updateable from AmigaOS
* Compatible with PAL/NTSC machines
* Compatible with PAL/NTSC machines
35. sor: 35. sor:
* Also supports Productivity/Euro72/DBLxxx screen modes
* Also supports Productivity/Euro72/DBLxxx screen modes
* Supports border blanking
* Supports border blanking
-
* HW support for DDC/CI (software support TBD)
+
* HW support for DDC/CI (software support needed)
* Expandable (expansion options TBA)
* Expandable (expansion options TBA)
-
* Other special extras (to be announced)
+
* Other special extras (TBA)
* Firmware and FPGA logics updateable from AmigaOS
* Firmware and FPGA logics updateable from AmigaOS
* DVI-I output (analogue VGA and HDMI possible with a passive adapter)
* DVI-I output (analogue VGA and HDMI possible with a passive adapter)

A lap 2013. június 16., 17:35-kori változata

Az oldal magyar nyelven itt elérhető. A ScanJuggler XAGA is a scandoubler (Lite) / flickerfixer for some Amiga models equipped with AGA chipset.

Tartalomjegyzék

Specifications

ScanJuggler XAGA Lite (rev.2)

ScanJuggler XAGA Lite (rev.2)

  • Scandoubler for A1200 and A4000(D) machines
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolution: 768x580
  • Color depth: 24/21 bit (depending on color mode)
  • PAL/NTSC/Euro36 compatible
  • Slightly reduces interlace blinking
  • Also supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • HW support for DDC/CI (software support needed)
  • Other special extras (TBA)
  • Firmware and FPGA logics updateable from AmigaOS
  • Compatible with PAL/NTSC machines
  • Analogue VGA output
  • Est. availability: Q2 2013

Price: international price to be announced

ScanJuggler XAGA rev.2 prototype

ScanJuggler XAGA (rev.2)

  • Scandoubler and Flickerfixer for A1200 and A4000(D) machines
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolutions, eg.:
    • PAL: 1536x576 (SHiRes support)
    • Custom screen modes: 1280x720, 1024x768
  • Color depth: 24 bit
  • PAL/NTSC/Euro36 compatible
  • Also supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • HW support for DDC/CI (software support needed)
  • Expandable (expansion options TBA)
  • Other special extras (TBA)
  • Firmware and FPGA logics updateable from AmigaOS
  • DVI-I output (analogue VGA and HDMI possible with a passive adapter)
  • Est. availability: Q2 2013.

Price: international price to be announced

Connectors

Default

ScanJuggler XAGA Lite comes with a VGA connector by default:

ScanJuggler XAGA VGA connector

The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI.

The DVI connector for ScanJuggler XAGA will be announced later.

Extra

The Analogue Switcher Module is an extra add-on for the ScanJuggler. It fits below the floppy in an A1200, or into a slot-backplate in an A4000.

ScanJuggler XAGA Analogue Switcher M.
ScanJuggler XAGA Analogue Switcher Module

It connects to the SJ with a shielded cable and has also an input connector for your BVision or CVision. Switching between the inputs is automatic or can be controlled with a button on the module. The button is also used to control other functionality of the SJ. This connector supports DDC/CI. The Analogue Switcher Module works with the ScanJuggler XAGA model, but it doesn't support the digital (DVI) output, only its analogue VGA output.

Price: international price to be announced

Ordering

Ordering will be possible after international prices are announced. Meanwhile, you can express your interest for this product or request additional information via e-mail: scanjuggler-at-gmail.com

You can also subscribe to the ScanJuggler Announcement List [1].

Személyes eszközök