ScanJuggler en

A amigaspirit.hu - pegasos.hu Wiki wikiből

(Változatok közti eltérés)
(update of availability)
(Adding SJ HDMI Module A1200/RFM info)
8. sor: 8. sor:
* Scandoubler for A1200 and A4000(D) machines
* Scandoubler for A1200 and A4000(D) machines
 +
* Provides better analog image quality than the original chipset
* When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
* When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
* Max. resolution: 768x580
* Max. resolution: 768x580
18. sor: 19. sor:
* Other special extras (TBA)
* Other special extras (TBA)
* Firmware and FPGA logics updateable from AmigaOS
* Firmware and FPGA logics updateable from AmigaOS
-
* Compatible with PAL/NTSC machines
+
* Compatible with PAL/NTSC/1Dx/2B machines
-
* Analogue VGA output
+
* Analog VGA output
-
* Est. availability: Q1 2014
+
Price: international price to be announced  
Price: international price to be announced  
27. sor: 27. sor:
* Scandoubler and Flickerfixer for A1200 and A4000(D) machines
* Scandoubler and Flickerfixer for A1200 and A4000(D) machines
 +
* Provides better image quality than the original chipset
* When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
* When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
* Max. resolutions, eg.:
* Max. resolutions, eg.:
39. sor: 40. sor:
* Other special extras (TBA)
* Other special extras (TBA)
* Firmware and FPGA logics updateable from AmigaOS
* Firmware and FPGA logics updateable from AmigaOS
-
* DVI-I output (analogue VGA and HDMI possible with a passive adapter)
+
* DVI-I output (analog VGA and HDMI possible with a passive adapter)
* Est. availability: soon
* Est. availability: soon
50. sor: 51. sor:
|[[Image:Sj_default_cable.jpg|thumb|none|230px|ScanJuggler XAGA VGA connector]]
|[[Image:Sj_default_cable.jpg|thumb|none|230px|ScanJuggler XAGA VGA connector]]
|}
|}
-
The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI.
+
* Fits both into A1200 and A4000
 +
* In A1200 it fits together with the ELBOX KEY V2.0 and the HDD frame
 +
* In A4000 it doesn't collide with the card put in the lowest slot
 +
* Has a button to control the SJ
 +
* Doesn't support DDC/CI
-
The DVI connector for ScanJuggler XAGA will be announced later.
+
The connector for ScanJuggler XAGA is similar.
===Extras (Optional)===
===Extras (Optional)===
'''SJ Switcher Module (VGA)'''
'''SJ Switcher Module (VGA)'''
-
 
-
* Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200.
 
-
* Provides VGA output.
 
-
* Connects to the main card with a shielded cable.
 
-
* Has an input connector for your BVision or CVision.
 
-
* Switching between the inputs is automatic or can be controlled with a button on the module.
 
-
* The button can also be used to control other functionality of the ScanJuggler XAGA's.
 
-
* Supports DDC/CI.
 
-
* This one is mainly for the ScanJuggler XAGA Lite, but can also be used with the normal XAGA version in case only the analog VGA output is needed.
 
-
 
-
Price: international price to be announced
 
-
 
{|
{|
| [[Image:Sj_switcher.jpg|thumb|230px|ScanJuggler Switcher Module (VGA)]]
| [[Image:Sj_switcher.jpg|thumb|230px|ScanJuggler Switcher Module (VGA)]]
| [[Image:Sj_switcher_inside.jpg|thumb|244px|ScanJuggler Switcher Module (VGA)]]
| [[Image:Sj_switcher_inside.jpg|thumb|244px|ScanJuggler Switcher Module (VGA)]]
|}
|}
 +
* Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
 +
* Provides VGA output
 +
* Connects to the main card with a shielded cable
 +
* Has an input connector for your BVision or CVision
 +
* Switching between the inputs is automatic or can be controlled with a button on the module
 +
* The button can also be used to control other functionality of the ScanJuggler XAGA's
 +
* Supports DDC/CI
 +
* This one is mainly for the ScanJuggler XAGA Lite, but can also be used with the normal XAGA version in case only the analog VGA output is needed
-
'''SJ Switcher Module (DVI)'''
+
Price: international price to be announced
-
* Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200.
+
 
-
* Provides DVI-I output (analog+digital). (It can also be converted to VGA or HDMI using simple adapters.)
+
'''SJ Switcher Module (DVI)'''
-
* Connects to the main card with a shielded cable.
+
{|
-
* Has an input connector for your BVision/CVision.
+
| [[Image:SJ_Switcher_Module_(DVI).jpg‎|thumb|230px|ScanJuggler Switcher Module (DVI)]]
-
* Switching between the inputs can be automatic or controlled with a button on the module.
+
| [[Image:SJ_Switcher_Module_(DVI)_inside_A1200.jpg‎|thumb|230px|ScanJuggler Switcher Module (DVI)]]
-
* The button can also be used to control other functionality of the ScanJuggler XAGA's.
+
|}
-
* Supports DDC/CI.
+
* Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
-
* This one is mainly for the ScanJuggler XAGA.
+
* Provides DVI-I output (analog+digital) (It can also be converted to VGA or HDMI using simple adapters.)
 +
* Connects to the main card with a shielded cable
 +
* Has an input connector for your BVision/CVision
 +
* Switching between the inputs can be automatic or controlled with a button on the module
 +
* The button can also be used to control other functionality of the ScanJuggler XAGA's
 +
* Supports DDC/CI
 +
* This one is mainly for the ScanJuggler XAGA
* (Can also be used with the ScanJuggler XAGA Lite - no digital output is available this time -, in case you plan to switch to the ScanJuggler XAGA later.)
* (Can also be used with the ScanJuggler XAGA Lite - no digital output is available this time -, in case you plan to switch to the ScanJuggler XAGA later.)
* The switching is done on the analog domain, thus image of the BVision/CVision is available only through the analog portion of the DVI-I output connector! (It does not digitalize the image of the Bvision/CVision card.)
* The switching is done on the analog domain, thus image of the BVision/CVision is available only through the analog portion of the DVI-I output connector! (It does not digitalize the image of the Bvision/CVision card.)
Price: international price to be announced
Price: international price to be announced
 +
 +
 +
'''SJ HDMI Module A1200/RFM'''
 +
{|
 +
| [[Image:SJ_HDMI_Module_A1200RFM.jpg‎|thumb|230px|ScanJuggler HDMI Module]]
 +
| [[Image:SJ_HDMI_Module_A1200RFM_outside.jpg‎|thumb|230px|ScanJuggler HDMI Module]]
 +
| [[Image:SJ_XAGA_3.2_+_SJ_HDMI_Module_A1200RFM.jpg|thumb|230px|ScanJuggler HDMI Module]]
 +
| [[Image:SJ_HDMI_Module_A1200RFM_back.jpg‎|thumb|230px|ScanJuggler HDMI Module]]
 +
|}
 +
* Provides HDMI output for the ScanJuggler XAGA (It can be converted to DVI-D with a simple adapter.)
 +
* To be assembled in place of the A1200 RF modulator
 +
* Connects to the main card via a bridge (included)
 +
* Also has the button for control of certain functions of the SJ
 +
* Supports DDC/CI
 +
== Ordering ==
== Ordering ==

A lap 2015. szeptember 27., 21:05-kori változata

Az oldal magyar nyelven itt elérhető. A ScanJuggler XAGA is a scandoubler (Lite) / flickerfixer for some Amiga models equipped with AGA chipset.

Tartalomjegyzék

Specifications

ScanJuggler XAGA Lite (rev.2)

ScanJuggler XAGA Lite (rev.2)

  • Scandoubler for A1200 and A4000(D) machines
  • Provides better analog image quality than the original chipset
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolution: 768x580
  • Color depth: 24/21 bit (depending on color mode)
  • PAL/NTSC/Euro36 compatible
  • Slightly reduces interlace blinking
  • Also supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • HW support for DDC/CI (software support needed)
  • Other special extras (TBA)
  • Firmware and FPGA logics updateable from AmigaOS
  • Compatible with PAL/NTSC/1Dx/2B machines
  • Analog VGA output

Price: international price to be announced

ScanJuggler XAGA (rev.3)

ScanJuggler XAGA (rev.3)

  • Scandoubler and Flickerfixer for A1200 and A4000(D) machines
  • Provides better image quality than the original chipset
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolutions, eg.:
    • PAL: 1536x576 (SHiRes support)
    • Custom screen modes: 1280x720, 1024x768
  • Color depth: 24 bit
  • PAL/NTSC/Euro36 compatible
  • Also supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • HW support for DDC/CI (software support needed)
  • Expandable (expansion options TBA)
  • Other special extras (TBA)
  • Firmware and FPGA logics updateable from AmigaOS
  • DVI-I output (analog VGA and HDMI possible with a passive adapter)
  • Est. availability: soon

Price: international price to be announced

Connectors

Default

ScanJuggler XAGA Lite comes with a VGA connector by default:

ScanJuggler XAGA VGA connector
  • Fits both into A1200 and A4000
  • In A1200 it fits together with the ELBOX KEY V2.0 and the HDD frame
  • In A4000 it doesn't collide with the card put in the lowest slot
  • Has a button to control the SJ
  • Doesn't support DDC/CI

The connector for ScanJuggler XAGA is similar.

Extras (Optional)

SJ Switcher Module (VGA)

ScanJuggler Switcher Module (VGA)
ScanJuggler Switcher Module (VGA)
  • Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
  • Provides VGA output
  • Connects to the main card with a shielded cable
  • Has an input connector for your BVision or CVision
  • Switching between the inputs is automatic or can be controlled with a button on the module
  • The button can also be used to control other functionality of the ScanJuggler XAGA's
  • Supports DDC/CI
  • This one is mainly for the ScanJuggler XAGA Lite, but can also be used with the normal XAGA version in case only the analog VGA output is needed

Price: international price to be announced


SJ Switcher Module (DVI)

ScanJuggler Switcher Module (DVI)
ScanJuggler Switcher Module (DVI)
  • Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
  • Provides DVI-I output (analog+digital) (It can also be converted to VGA or HDMI using simple adapters.)
  • Connects to the main card with a shielded cable
  • Has an input connector for your BVision/CVision
  • Switching between the inputs can be automatic or controlled with a button on the module
  • The button can also be used to control other functionality of the ScanJuggler XAGA's
  • Supports DDC/CI
  • This one is mainly for the ScanJuggler XAGA
  • (Can also be used with the ScanJuggler XAGA Lite - no digital output is available this time -, in case you plan to switch to the ScanJuggler XAGA later.)
  • The switching is done on the analog domain, thus image of the BVision/CVision is available only through the analog portion of the DVI-I output connector! (It does not digitalize the image of the Bvision/CVision card.)

Price: international price to be announced


SJ HDMI Module A1200/RFM

ScanJuggler HDMI Module
ScanJuggler HDMI Module
ScanJuggler HDMI Module
ScanJuggler HDMI Module
  • Provides HDMI output for the ScanJuggler XAGA (It can be converted to DVI-D with a simple adapter.)
  • To be assembled in place of the A1200 RF modulator
  • Connects to the main card via a bridge (included)
  • Also has the button for control of certain functions of the SJ
  • Supports DDC/CI


Ordering

Ordering will be possible after international prices are announced. Meanwhile, you can express your interest for this product or request additional information via e-mail: scanjuggler-at-gmail.com

You can also subscribe to the ScanJuggler Announcement List [1]. - sorry, it isn't working now.

Személyes eszközök