ScanJuggler en

A amigaspirit.hu - pegasos.hu Wiki wikiből

(Változatok közti eltérés)
 
(23 közbeeső változat nincs mutatva)
1. sor: 1. sor:
 +
A ScanJuggler XAGA is a scandoubler/flickerfixer for Amiga models equipped with AGA chipset.
 +
[[ScanJuggler|Az oldal magyar nyelven itt elérhető.]]
[[ScanJuggler|Az oldal magyar nyelven itt elérhető.]]
-
A ScanJuggler XAGA is a scandoubler (Lite) and flickerfixer for some Amiga modells equipped with AGA chipset.
 
==Specifications==
==Specifications==
-
The current prototypes have the following specifications:
 
[[Image:Sj_xaga_lite.jpg|thumb|300px|ScanJuggler XAGA Lite (rev.2)]]
[[Image:Sj_xaga_lite.jpg|thumb|300px|ScanJuggler XAGA Lite (rev.2)]]
===ScanJuggler XAGA Lite (rev.2)===
===ScanJuggler XAGA Lite (rev.2)===
* Scandoubler for A1200 and A4000(D) machines
* Scandoubler for A1200 and A4000(D) machines
 +
* Provides better analog image quality than the original chipset
* When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
* When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
* Max. resolution: 768x580
* Max. resolution: 768x580
* Color depth: 24/21 bit (depending on color mode)
* Color depth: 24/21 bit (depending on color mode)
* PAL/NTSC/Euro36 compatible
* PAL/NTSC/Euro36 compatible
-
* Slightly reduce interlace blinking
+
* Slightly reduces interlace blinking
-
* Supports Productivity/Euro72/DBLxxx screen modes
+
* Also supports Productivity/Euro72/DBLxxx screen modes
* Supports border blanking
* Supports border blanking
-
* DDC/CI support (software is in development)
+
* HW support for DDC/CI (software support needed)
-
* Other special extras (to be announced)
+
* Other special extras (TBA)
-
* Analogue VGA output
+
* Firmware and FPGA logics updateable from AmigaOS
-
* Est. availability: Q1 2013.
+
* Compatible with PAL/NTSC/1Dx/2B machines
 +
* Analog VGA output
 +
[[Image:SJ_XAGA_rev3.jpg|thumb|300px|ScanJuggler XAGA (rev.3)]]
-
Price: international price to be announced
+
 
-
[[Image:Sj_xaga.jpg|thumb|300px|ScanJuggler XAGA]]
+
===ScanJuggler XAGA (rev.3)===
-
===ScanJuggler XAGA===
+
* Scandoubler and Flickerfixer for A1200 and A4000(D) machines
* Scandoubler and Flickerfixer for A1200 and A4000(D) machines
 +
* Provides better image quality than the original chipset
* When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
* When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
* Max. resolutions, eg.:
* Max. resolutions, eg.:
-
** PAL: 1536x580 (SHiRes support)
+
** PAL: 1536x576 (SHiRes support)
-
** Custom screen modes: 1280x600, 1024x768
+
** Custom screen modes: 1280x720, 1024x768
* Color depth: 24 bit
* Color depth: 24 bit
* PAL/NTSC/Euro36 compatible
* PAL/NTSC/Euro36 compatible
-
* Supports Productivity/Euro72/DBLxxx screen modes
+
* Also supports Productivity/Euro72/DBLxxx screen modes
* Supports border blanking
* Supports border blanking
-
* DDC/CI support (software is in development)
+
* HW support for DDC/CI (software support needed)
-
* Other special extras (to be announced)
+
* Expandable (expansion options TBA)
-
* DVI-I output (analogue VGA and HDMI possible with a passive adapter)
+
* Other special extras (TBA)
-
* Est. availability: Q1 2013.
+
* Firmware and FPGA logics updateable from AmigaOS
 +
* Output options: VGA, DVI-I, HDMI
-
Price: international price to be announced
 
== Connectors ==
== Connectors ==
-
===Default===
+
===VGA (default)===
-
ScanJuggler comes with a VGA connector by default:
+
ScanJuggler XAGA Lite comes with a VGA connector by default:
{|
{|
|[[Image:Sj_default_cable.jpg|thumb|none|230px|ScanJuggler XAGA VGA connector]]
|[[Image:Sj_default_cable.jpg|thumb|none|230px|ScanJuggler XAGA VGA connector]]
|}
|}
-
The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI.
+
* Fits both into A1200 and A4000
 +
* In A1200 it fits together with the ELBOX KEY V2.0 and the HDD frame
 +
* In A4000 it doesn't collide with the card put in the lowest slot
 +
* Has a button to control the SJ
 +
* Doesn't support DDC/CI
 +
 
 +
The connector for ScanJuggler XAGA is similar.
 +
 
 +
 
 +
===SJ Switcher Module/VGA===
-
===Extra===
 
-
The Switcher Module is an extra add-on for the ScanJuggler. It fits below the floppy in an A1200, or into a slot-backplate in an A4000.
 
{|
{|
-
| [[Image:Sj_switcher.jpg|thumb|230px|ScanJuggler XAGA Switcher Module]]
+
| [[Image:Sj_switcher.jpg|thumb|230px|ScanJuggler Switcher Module (VGA)]]
-
| [[Image:Sj_switcher_inside.jpg|thumb|244px|ScanJuggler XAGA Switcher Module]]
+
| [[Image:Sj_switcher_inside.jpg|thumb|244px|ScanJuggler Switcher Module (VGA)]]
|}
|}
-
It connects to the SJ with a shielded cable and it also has an input connector to for your BVision or CVision. Switching between the inputs is automatic or can be controlled with a button on the module. This connector supports DDC/CI.
+
* Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
 +
* Provides VGA output
 +
* Connects to the main card with a shielded cable
 +
* Has an input connector for your BVision or CVision
 +
* Switching between the inputs is automatic or can be controlled with a button on the module
 +
* The button can also be used to control other functionality of the ScanJuggler XAGA's
 +
* Supports DDC/CI
 +
* This one is mainly for the ScanJuggler XAGA Lite, but can also be used with the normal XAGA version in case only the analog VGA output is needed
 +
 
 +
 
 +
===SJ Switcher Module/DVI===
 +
{|
 +
| [[Image:SJ_Switcher_Module_(DVI).jpg‎|thumb|230px|ScanJuggler Switcher Module (DVI)]]
 +
| [[Image:SJ_Switcher_Module_(DVI)_inside_A1200.jpg‎|thumb|230px|ScanJuggler Switcher Module (DVI)]]
 +
|}
 +
* Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
 +
* Provides DVI-I output (analog+digital) (It can also be converted to VGA or HDMI using simple adapters.)
 +
* Connects to the main card with a shielded cable
 +
* Has an input connector for your BVision/CVision
 +
* Switching between the inputs can be automatic or controlled with a button on the module
 +
* The button can also be used to control other functionality of the ScanJuggler XAGA's
 +
* Supports DDC/CI
 +
* This one is mainly for the ScanJuggler XAGA
 +
* (Can also be used with the ScanJuggler XAGA Lite - no digital output is available this time -, in case you plan to switch to the ScanJuggler XAGA later.)
 +
* The switching is done on the analog domain, thus image of the BVision/CVision is available only through the analog portion of the DVI-I output connector! (It does not digitalize the image of the Bvision/CVision card.)
 +
 
 +
 
 +
===SJ HDMI Module A1200/RFM===
 +
{|
 +
| [[Image:SJ_HDMI_Module_A1200RFM.jpg‎|thumb|230px|ScanJuggler HDMI Module]]
 +
| [[Image:SJ_HDMI_Module_A1200RFM_outside.jpg‎|thumb|230px|ScanJuggler HDMI Module]]
 +
| [[Image:SJ_XAGA_3.2_+_SJ_HDMI_Module_A1200RFM.jpg|thumb|230px|ScanJuggler HDMI Module]]
 +
| [[Image:SJ_HDMI_Module_A1200RFM_back.jpg‎|thumb|230px|ScanJuggler HDMI Module]]
 +
|}
 +
* Provides HDMI output for the ScanJuggler XAGA (It can be converted to DVI-D with a simple adapter.)
 +
* To be assembled in place of the A1200 RF modulator
 +
* Connects to the main card via a bridge (included)
 +
* Also has the button for control of certain functions of the SJ
 +
* Supports DDC/CI
 +
 
-
Price: international price to be announced
+
== Info ==
 +
Email: scanjuggler-at-gmail.com
-
== Ordering ==
+
ScanJuggler Announcement List: [http://discuss.127001.be/listinfo/announcescanjuggler]. - sorry, it isn't working now.
-
Additional information available and preordering is possible via e-mail: scanjuggler-at-gmail.com
+

A lap jelenlegi, 2017. január 18., 16:07-kori változata

A ScanJuggler XAGA is a scandoubler/flickerfixer for Amiga models equipped with AGA chipset.

Az oldal magyar nyelven itt elérhető.

Tartalomjegyzék

Specifications

ScanJuggler XAGA Lite (rev.2)

ScanJuggler XAGA Lite (rev.2)

  • Scandoubler for A1200 and A4000(D) machines
  • Provides better analog image quality than the original chipset
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolution: 768x580
  • Color depth: 24/21 bit (depending on color mode)
  • PAL/NTSC/Euro36 compatible
  • Slightly reduces interlace blinking
  • Also supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • HW support for DDC/CI (software support needed)
  • Other special extras (TBA)
  • Firmware and FPGA logics updateable from AmigaOS
  • Compatible with PAL/NTSC/1Dx/2B machines
  • Analog VGA output
ScanJuggler XAGA (rev.3)


ScanJuggler XAGA (rev.3)

  • Scandoubler and Flickerfixer for A1200 and A4000(D) machines
  • Provides better image quality than the original chipset
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolutions, eg.:
    • PAL: 1536x576 (SHiRes support)
    • Custom screen modes: 1280x720, 1024x768
  • Color depth: 24 bit
  • PAL/NTSC/Euro36 compatible
  • Also supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • HW support for DDC/CI (software support needed)
  • Expandable (expansion options TBA)
  • Other special extras (TBA)
  • Firmware and FPGA logics updateable from AmigaOS
  • Output options: VGA, DVI-I, HDMI


Connectors

VGA (default)

ScanJuggler XAGA Lite comes with a VGA connector by default:

ScanJuggler XAGA VGA connector
  • Fits both into A1200 and A4000
  • In A1200 it fits together with the ELBOX KEY V2.0 and the HDD frame
  • In A4000 it doesn't collide with the card put in the lowest slot
  • Has a button to control the SJ
  • Doesn't support DDC/CI

The connector for ScanJuggler XAGA is similar.


SJ Switcher Module/VGA

ScanJuggler Switcher Module (VGA)
ScanJuggler Switcher Module (VGA)
  • Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
  • Provides VGA output
  • Connects to the main card with a shielded cable
  • Has an input connector for your BVision or CVision
  • Switching between the inputs is automatic or can be controlled with a button on the module
  • The button can also be used to control other functionality of the ScanJuggler XAGA's
  • Supports DDC/CI
  • This one is mainly for the ScanJuggler XAGA Lite, but can also be used with the normal XAGA version in case only the analog VGA output is needed


SJ Switcher Module/DVI

ScanJuggler Switcher Module (DVI)
ScanJuggler Switcher Module (DVI)
  • Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
  • Provides DVI-I output (analog+digital) (It can also be converted to VGA or HDMI using simple adapters.)
  • Connects to the main card with a shielded cable
  • Has an input connector for your BVision/CVision
  • Switching between the inputs can be automatic or controlled with a button on the module
  • The button can also be used to control other functionality of the ScanJuggler XAGA's
  • Supports DDC/CI
  • This one is mainly for the ScanJuggler XAGA
  • (Can also be used with the ScanJuggler XAGA Lite - no digital output is available this time -, in case you plan to switch to the ScanJuggler XAGA later.)
  • The switching is done on the analog domain, thus image of the BVision/CVision is available only through the analog portion of the DVI-I output connector! (It does not digitalize the image of the Bvision/CVision card.)


SJ HDMI Module A1200/RFM

ScanJuggler HDMI Module
ScanJuggler HDMI Module
ScanJuggler HDMI Module
ScanJuggler HDMI Module
  • Provides HDMI output for the ScanJuggler XAGA (It can be converted to DVI-D with a simple adapter.)
  • To be assembled in place of the A1200 RF modulator
  • Connects to the main card via a bridge (included)
  • Also has the button for control of certain functions of the SJ
  • Supports DDC/CI


Info

Email: scanjuggler-at-gmail.com

ScanJuggler Announcement List: [1]. - sorry, it isn't working now.

Személyes eszközök