ScanJuggler en

Innen: amigaspirit.hu - pegasos.hu Wiki
Ugrás a navigációhozUgrás a kereséshez

A ScanJuggler XAGA is a scandoubler/flickerfixer for Amiga models equipped with AGA chipset.

Az oldal magyar nyelven itt elérhető.

Specifications

ScanJuggler XAGA Lite (rev.2)

ScanJuggler XAGA Lite (rev.2)

  • Scandoubler for A1200 and A4000(D) machines
  • Provides better analog image quality than the original chipset
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolution: 768x580
  • Color depth: 24/21 bit (depending on color mode)
  • PAL/NTSC/Euro36 compatible
  • Slightly reduces interlace blinking
  • Also supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • HW support for DDC/CI (software support needed)
  • Other special extras (TBA)
  • Firmware and FPGA logics updateable from AmigaOS
  • Compatible with PAL/NTSC/1Dx/2B machines
  • Analog VGA output
ScanJuggler XAGA (rev.3)


ScanJuggler XAGA (rev.3)

  • Scandoubler and Flickerfixer for A1200 and A4000(D) machines
  • Provides better image quality than the original chipset
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolutions, eg.:
    • PAL: 1536x576 (SHiRes support)
    • Custom screen modes: 1280x720, 1024x768
  • Color depth: 24 bit
  • PAL/NTSC/Euro36 compatible
  • Also supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • HW support for DDC/CI (software support needed)
  • Expandable (expansion options TBA)
  • Other special extras (TBA)
  • Firmware and FPGA logics updateable from AmigaOS
  • Output options: VGA, DVI-I, HDMI


Connectors

VGA (default)

ScanJuggler XAGA Lite comes with a VGA connector by default:

ScanJuggler XAGA VGA connector
  • Fits both into A1200 and A4000
  • In A1200 it fits together with the ELBOX KEY V2.0 and the HDD frame
  • In A4000 it doesn't collide with the card put in the lowest slot
  • Has a button to control the SJ
  • Doesn't support DDC/CI

The connector for ScanJuggler XAGA is similar.


SJ Switcher Module/VGA

ScanJuggler Switcher Module (VGA)
ScanJuggler Switcher Module (VGA)
  • Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
  • Provides VGA output
  • Connects to the main card with a shielded cable
  • Has an input connector for your BVision or CVision
  • Switching between the inputs is automatic or can be controlled with a button on the module
  • The button can also be used to control other functionality of the ScanJuggler XAGA's
  • Supports DDC/CI
  • This one is mainly for the ScanJuggler XAGA Lite, but can also be used with the normal XAGA version in case only the analog VGA output is needed


SJ Switcher Module/DVI

ScanJuggler Switcher Module (DVI)
ScanJuggler Switcher Module (DVI)
  • Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
  • Provides DVI-I output (analog+digital) (It can also be converted to VGA or HDMI using simple adapters.)
  • Connects to the main card with a shielded cable
  • Has an input connector for your BVision/CVision
  • Switching between the inputs can be automatic or controlled with a button on the module
  • The button can also be used to control other functionality of the ScanJuggler XAGA's
  • Supports DDC/CI
  • This one is mainly for the ScanJuggler XAGA
  • (Can also be used with the ScanJuggler XAGA Lite - no digital output is available this time -, in case you plan to switch to the ScanJuggler XAGA later.)
  • The switching is done on the analog domain, thus image of the BVision/CVision is available only through the analog portion of the DVI-I output connector! (It does not digitalize the image of the Bvision/CVision card.)


SJ HDMI Module A1200/RFM

ScanJuggler HDMI Module
ScanJuggler HDMI Module
ScanJuggler HDMI Module
ScanJuggler HDMI Module
  • Provides HDMI output for the ScanJuggler XAGA (It can be converted to DVI-D with a simple adapter.)
  • To be assembled in place of the A1200 RF modulator
  • Connects to the main card via a bridge (included)
  • Also has the button for control of certain functions of the SJ
  • Supports DDC/CI


Info

Email: scanjuggler-at-gmail.com

ScanJuggler Announcement List: [1]. - sorry, it isn't working now.