„ScanJuggler en” változatai közötti eltérés
(requested changes) |
(cosmetics) |
||
| 17. sor: | 17. sor: | ||
* Supports border blanking | * Supports border blanking | ||
* DDC/CI support (software is in development) | * DDC/CI support (software is in development) | ||
* NEW: Firmware and FPGA logics updateable from AmigaOS | * '''NEW''': Firmware and FPGA logics updateable from AmigaOS | ||
* Analogue VGA output | * Analogue VGA output | ||
* Est. availability: Q2 2013 | * Est. availability: Q2 2013 | ||
| 36. sor: | 36. sor: | ||
* DDC/CI support (software is in development) | * DDC/CI support (software is in development) | ||
* Other special extras (to be announced) | * Other special extras (to be announced) | ||
* NEW: Firmware and FPGA logics updateable from AmigaOS | * '''NEW''': Firmware and FPGA logics updateable from AmigaOS | ||
* DVI-I output (analogue VGA and HDMI possible with a passive adapter) | * DVI-I output (analogue VGA and HDMI possible with a passive adapter) | ||
* Est. availability: Q2 2013. | * Est. availability: Q2 2013. | ||
A lap 2013. március 16., 19:30-kori változata
Az oldal magyar nyelven itt elérhető. A ScanJuggler XAGA is a scandoubler (Lite) and flickerfixer (FF) for some Amiga modells equipped with AGA chipset.
Specifications
The current prototypes have the following specifications:
ScanJuggler XAGA Lite (rev.2)
- Scandoubler for A1200 and A4000(D) machines
- When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
- Max. resolution: 768x580
- Color depth: 24/21 bit (depending on color mode)
- PAL/NTSC/Euro36 compatible
- Slightly reduces interlace blinking
- Supports Productivity/Euro72/DBLxxx screen modes
- Supports border blanking
- DDC/CI support (software is in development)
- NEW: Firmware and FPGA logics updateable from AmigaOS
- Analogue VGA output
- Est. availability: Q2 2013
Price: international price to be announced
ScanJuggler XAGA FF
- Scandoubler and Flickerfixer for A1200 and A4000(D) machines
- When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
- Max. resolutions, eg.:
- PAL: 1536x580 (SHiRes support)
- Custom screen modes: 1280x600, 1024x768
- Color depth: 24 bit
- PAL/NTSC/Euro36 compatible
- Supports Productivity/Euro72/DBLxxx screen modes
- Supports border blanking
- DDC/CI support (software is in development)
- Other special extras (to be announced)
- NEW: Firmware and FPGA logics updateable from AmigaOS
- DVI-I output (analogue VGA and HDMI possible with a passive adapter)
- Est. availability: Q2 2013.
Price: international price to be announced
Connectors
Default
ScanJuggler XAGA Lite comes with a VGA connector by default:
The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI.
The DVI connector for ScanJuggler XAGA will be announced later.
Extra
The Analogue Switcher Module is an extra add-on for the ScanJuggler. It fits below the floppy in an A1200, or into a slot-backplate in an A4000.
It connects to the SJ with a shielded cable and it also has an input connector to for your BVision or CVision. Switching between the inputs is automatic or can be controlled with a button on the module. The button is also used to control other functionality of the SJ. This connector supports DDC/CI. The Analogue Switcher Module works with the ScanJuggler XAGA (non-Lite) model, but it doesn't support the digital (DVI) output, only its analogue VGA output.
Price: international price to be announced
Ordering
Ordering will be possible after international prices are announced. Meanwhile, you can express your interest for this product or request additional information via e-mail: scanjuggler-at-gmail.com
