„ScanJuggler en” változatai közötti eltérés
(FF you too) |
Dezz (vitalap | szerkesztései) Nincs szerkesztési összefoglaló |
||
1. sor: | 1. sor: | ||
[[ScanJuggler|Az oldal magyar nyelven itt elérhető.]] | [[ScanJuggler|Az oldal magyar nyelven itt elérhető.]] | ||
A ScanJuggler XAGA is a scandoubler (Lite) | A ScanJuggler XAGA is a scandoubler (Lite) / flickerfixer for some Amiga modells equipped with AGA chipset. | ||
==Specifications== | ==Specifications== | ||
[[Image:Sj_xaga_lite.jpg|thumb|300px|ScanJuggler XAGA Lite (rev.2)]] | [[Image:Sj_xaga_lite.jpg|thumb|300px|ScanJuggler XAGA Lite (rev.2)]] | ||
===ScanJuggler XAGA Lite (rev.2)=== | ===ScanJuggler XAGA Lite (rev.2)=== | ||
14. sor: | 13. sor: | ||
* PAL/NTSC/Euro36 compatible | * PAL/NTSC/Euro36 compatible | ||
* Slightly reduces interlace blinking | * Slightly reduces interlace blinking | ||
* | * Also supports Productivity/Euro72/DBLxxx screen modes | ||
* Supports border blanking | * Supports border blanking | ||
* DDC/CI | * HW support for DDC/CI (software support TBD) | ||
* '''NEW''': Firmware and FPGA logics updateable from AmigaOS | * '''NEW''': Firmware and FPGA logics updateable from AmigaOS | ||
* Compatible with PAL/NTSC machines | |||
* Analogue VGA output | * Analogue VGA output | ||
* Est. availability: Q2 2013 | * Est. availability: Q2 2013 | ||
Price: international price to be announced | Price: international price to be announced | ||
[[Image:Sj_xaga.jpg|thumb|300px|ScanJuggler XAGA | [[Image:Sj_xaga.jpg|thumb|300px|ScanJuggler XAGA (rev.1)]] | ||
===ScanJuggler XAGA | ===ScanJuggler XAGA (rev.1)=== | ||
* Scandoubler and Flickerfixer for A1200 and A4000(D) machines | * Scandoubler and Flickerfixer for A1200 and A4000(D) machines | ||
32. sor: | 32. sor: | ||
* Color depth: 24 bit | * Color depth: 24 bit | ||
* PAL/NTSC/Euro36 compatible | * PAL/NTSC/Euro36 compatible | ||
* | * Also supports Productivity/Euro72/DBLxxx screen modes | ||
* Supports border blanking | * Supports border blanking | ||
* DDC/CI | * HW support for DDC/CI (software support TBD) | ||
* Other special extras (to be announced) | * Other special extras (to be announced) | ||
* '''NEW''': Firmware and FPGA logics updateable from AmigaOS | * '''NEW''': Firmware and FPGA logics updateable from AmigaOS | ||
50. sor: | 50. sor: | ||
The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI. | The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI. | ||
The DVI connector for ScanJuggler XAGA | The DVI connector for ScanJuggler XAGA will be announced later. | ||
===Extra=== | ===Extra=== | ||
58. sor: | 58. sor: | ||
| [[Image:Sj_switcher_inside.jpg|thumb|244px|ScanJuggler XAGA Analogue Switcher Module]] | | [[Image:Sj_switcher_inside.jpg|thumb|244px|ScanJuggler XAGA Analogue Switcher Module]] | ||
|} | |} | ||
It connects to the SJ with a shielded cable and | It connects to the SJ with a shielded cable and has also an input connector to for your BVision or CVision. Switching between the inputs is automatic or can be controlled with a button on the module. The button is also used to control other functionality of the SJ. This connector supports DDC/CI. The Analogue Switcher Module works with the ScanJuggler XAGA model, but it doesn't support the digital (DVI) output, only its analogue VGA output. | ||
Price: international price to be announced | Price: international price to be announced | ||
64. sor: | 64. sor: | ||
== Ordering == | == Ordering == | ||
Ordering will be possible after international prices are announced. Meanwhile, you can express your interest for this product or request additional information via e-mail: scanjuggler-at-gmail.com | Ordering will be possible after international prices are announced. Meanwhile, you can express your interest for this product or request additional information via e-mail: scanjuggler-at-gmail.com | ||
You can also subscribe to the ScanJuggler Announcement List [http://discuss.127001.be/listinfo/announcescanjuggler]. |
A lap 2013. április 18., 19:15-kori változata
Az oldal magyar nyelven itt elérhető. A ScanJuggler XAGA is a scandoubler (Lite) / flickerfixer for some Amiga modells equipped with AGA chipset.
Specifications
ScanJuggler XAGA Lite (rev.2)
- Scandoubler for A1200 and A4000(D) machines
- When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
- Max. resolution: 768x580
- Color depth: 24/21 bit (depending on color mode)
- PAL/NTSC/Euro36 compatible
- Slightly reduces interlace blinking
- Also supports Productivity/Euro72/DBLxxx screen modes
- Supports border blanking
- HW support for DDC/CI (software support TBD)
- NEW: Firmware and FPGA logics updateable from AmigaOS
- Compatible with PAL/NTSC machines
- Analogue VGA output
- Est. availability: Q2 2013
Price: international price to be announced
ScanJuggler XAGA (rev.1)
- Scandoubler and Flickerfixer for A1200 and A4000(D) machines
- When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
- Max. resolutions, eg.:
- PAL: 1536x580 (SHiRes support)
- Custom screen modes: 1280x600, 1024x768
- Color depth: 24 bit
- PAL/NTSC/Euro36 compatible
- Also supports Productivity/Euro72/DBLxxx screen modes
- Supports border blanking
- HW support for DDC/CI (software support TBD)
- Other special extras (to be announced)
- NEW: Firmware and FPGA logics updateable from AmigaOS
- DVI-I output (analogue VGA and HDMI possible with a passive adapter)
- Est. availability: Q2 2013.
Price: international price to be announced
Connectors
Default
ScanJuggler XAGA Lite comes with a VGA connector by default:
The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI.
The DVI connector for ScanJuggler XAGA will be announced later.
Extra
The Analogue Switcher Module is an extra add-on for the ScanJuggler. It fits below the floppy in an A1200, or into a slot-backplate in an A4000.
It connects to the SJ with a shielded cable and has also an input connector to for your BVision or CVision. Switching between the inputs is automatic or can be controlled with a button on the module. The button is also used to control other functionality of the SJ. This connector supports DDC/CI. The Analogue Switcher Module works with the ScanJuggler XAGA model, but it doesn't support the digital (DVI) output, only its analogue VGA output.
Price: international price to be announced
Ordering
Ordering will be possible after international prices are announced. Meanwhile, you can express your interest for this product or request additional information via e-mail: scanjuggler-at-gmail.com
You can also subscribe to the ScanJuggler Announcement List [1].