ScanJuggler en

Az oldal magyar nyelven itt elérhető. A ScanJuggler XAGA is a scandoubler (Lite) / flickerfixer for some Amiga models equipped with AGA chipset.

Specifications

ScanJuggler XAGA Lite (rev.2)

ScanJuggler XAGA Lite (rev.2)

• Scandoubler for A1200 and A4000(D) machines
• Provides better analog image quality than the original chipset
• When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
• Max. resolution: 768x580
• Color depth: 24/21 bit (depending on color mode)
• PAL/NTSC/Euro36 compatible
• Slightly reduces interlace blinking
• Also supports Productivity/Euro72/DBLxxx screen modes
• Supports border blanking
• HW support for DDC/CI (software support needed)
• Other special extras (TBA)
• Firmware and FPGA logics updateable from AmigaOS
• Compatible with PAL/NTSC/1Dx/2B machines
• Analog VGA output

Price: international price to be announced

ScanJuggler XAGA (rev.3)

ScanJuggler XAGA (rev.3)

• Scandoubler and Flickerfixer for A1200 and A4000(D) machines
• Provides better image quality than the original chipset
• When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
• Max. resolutions, eg.:
  • PAL: 1536x576 (SHiRes support)
  • Custom screen modes: 1280x720, 1024x768
• Color depth: 24 bit
• PAL/NTSC/Euro36 compatible
• Also supports Productivity/Euro72/DBLxxx screen modes
• Supports border blanking
• HW support for DDC/CI (software support needed)
• Expandable (expansion options TBA)
• Other special extras (TBA)
• Firmware and FPGA logics updateable from AmigaOS
• DVI-I output (analog VGA and HDMI possible with a passive adapter)
• Est. availability: soon

Price: international price to be announced

Connectors

Default

ScanJuggler XAGA Lite comes with a VGA connector by default:

ScanJuggler XAGA VGA connector

• Fits both into A1200 and A4000
• In A1200 it fits together with the ELBOX KEY V2.0 and the HDD frame
• In A4000 it doesn't collide with the card put in the lowest slot
• Has a button to control the SJ
• Doesn't support DDC/CI

The connector for ScanJuggler XAGA is similar.

Extras (Optional)

SJ Switcher Module (VGA)

ScanJuggler Switcher Module (VGA)

ScanJuggler Switcher Module (VGA)

• Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
• Provides VGA output
• Connects to the main card with a shielded cable
• Has an input connector for your BVision or CVision
• Switching between the inputs is automatic or can be controlled with a button on the module
• The button can also be used to control other functionality of the ScanJuggler XAGA's
• Supports DDC/CI
• This one is mainly for the ScanJuggler XAGA Lite, but can also be used with the normal XAGA version in case only the analog VGA output is needed

Price: international price to be announced

SJ Switcher Module (DVI)

ScanJuggler Switcher Module (DVI)

ScanJuggler Switcher Module (DVI)

• Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
• Provides DVI-I output (analog+digital) (It can also be converted to VGA or HDMI using simple adapters.)
• Connects to the main card with a shielded cable
• Has an input connector for your BVision/CVision
• Switching between the inputs can be automatic or controlled with a button on the module
• The button can also be used to control other functionality of the ScanJuggler XAGA's
• Supports DDC/CI
• This one is mainly for the ScanJuggler XAGA
• (Can also be used with the ScanJuggler XAGA Lite - no digital output is available this time -, in case you plan to switch to the ScanJuggler XAGA later.)
• The switching is done on the analog domain, thus image of the BVision/CVision is available only through the analog portion of the DVI-I output connector! (It does not digitalize the image of the Bvision/CVision card.)

Price: international price to be announced

SJ HDMI Module A1200/RFM

ScanJuggler HDMI Module

ScanJuggler HDMI Module

ScanJuggler HDMI Module

ScanJuggler HDMI Module

• Provides HDMI output for the ScanJuggler XAGA (It can be converted to DVI-D with a simple adapter.)
• To be assembled in place of the A1200 RF modulator
• Connects to the main card via a bridge (included)
• Also has the button for control of certain functions of the SJ
• Supports DDC/CI

Ordering

Ordering will be possible after international prices are announced. Meanwhile, you can express your interest for this product or request additional information via e-mail: scanjuggler-at-gmail.com

You can also subscribe to the ScanJuggler Announcement List [1]. - sorry, it isn't working now.